blog

Can-Filter M5 Can Industrial Unit Explained: Airflow, Filters, and Perforated Core Design

Can-Filter M5 Can Industrial Unit

Can-Filter M5 Can Industrial Unit Explained: Airflow, Filters, and Perforated Core Design

The Can-Filter M5 Can Industrial Unit is a fan-and-filter unit that pulls air through 20 Can-Lite 9000 carbon filters to remove odors in industrial spaces and greenhouses. One US retailer lists its 20-inch Max-Fan at 3,509 CFM (about 5,962 m³/h) on 4.8 amps at 240 V. This guide is for buyers, engineers, and OEM sourcing teams. You will learn what the specs mean, how much air each filter carries, and how perforated tubes and corrosion resistance shape any carbon filter you buy or build.

What is the Can-Filter M5 Can Industrial Unit?

The Can-Filter M5 is a compact fan-and-filter unit for odor control in industrial spaces and greenhouse environments. It combines a 20-inch Max-Fan with 20 Can-Lite 9000 carbon filters that attach with twist-style bayonet mounts. The listing says it can be stacked or mounted and has a locking, soundproofed maintenance door.

ItemListed value
FanMax-Fan, 20 in
Airflow3,509 CFM (about 5,962 m³/h)
Electrical4.8 A at 240 V
Filters20 × Can-Lite 9000, sold separately
MountingTwist-style bayonet filter mounts; stackable or mountable
AccessLocking, insulated maintenance door
Listed price$3,202.45 at one US retailer (October 2026)

These figures come from a retailer listing, not from a manufacturer datasheet. Confirm them with the Can-Filters Group before you specify the unit. Frequency (50 or 60 Hz) and regional voltage versions are not stated in the listing.

Does M5 in the product name mean the EN 779 filter class?

No. In this product, M5 is a model name. In HVAC, M5 is an EN 779 filter class for medium-efficiency particle filters, and it describes a different kind of product from the M5 unit.

A particle filter such as the Camfil M-Pleat M5 panel is graded M5 under EN 779:2012. A Maico replacement filter lists the same class as ePM10 65% under the newer ISO 16890 method. Both capture particles. The Can-Lite 9000 is a carbon filter that adsorbs odors and gases. Searching “M5” on a spec sheet can therefore return the wrong product family, so always search for the full model name.

How much airflow does each Can-Lite 9000 filter carry in the M5 unit?

Each of the 20 filters carries about 175 CFM (about 298 m³/h) when the fan runs at its listed 3,509 CFM. That equals 70% of the Can-Lite 9000 exhaust rating of 250 CFM listed by a distributor table, so the filters are not the bottleneck.

MeasureCFMm³/h
M5 fan output (listed)3,5095,962
Per filter at full output (3509 ÷ 20)175298
Can-Lite 9000 max exhaust rating250425
Can-Lite 9000 max recirculating rating500850

Real airflow drops as resistance rises. A Can-Lite spec listing states that a 12-inch Max-Fan falls from 1,708 to 1,595 CFM through a filter, a loss of about 6.6% (see the Hydrobuilder listing). Expect a similar small loss on the M5, then verify it on site with a pressure gauge.

How does a carbon filter remove odors?

A carbon can filter removes odors by adsorption. Activated carbon granules hold VOCs and odor molecules on their surface as air passes through a packed bed. Bed depth matters: the Can-Lite 9000 is listed with a 1.25-inch bed, while larger Can-Lite filters list 2-inch beds.

A deeper bed gives air more contact time and more carbon, but it raises pressure drop. A shallow bed keeps airflow high and cuts capacity. Carbon saturates, and dust and humidity shorten its life, so a pre-filter protects the bed. Replace the carbon when odor returns or airflow drops. No single interval fits every site.

Why do perforated filter tubes matter in a carbon can filter?

A perforated filter tube holds the granular carbon in place and lets air pass through it. Larger Can-Lite filters list aluminum end caps and a 51% open perforation. Open area is the share of the tube wall that is hole, and it sets the balance between airflow and strength.

More open area lowers pressure drop and reduces tube stiffness. Hole size must also stay below the carbon granule size, or the shop adds a mesh liner. Otherwise carbon dust and granules escape. As an arithmetic example, 3/16-inch holes on 1/4-inch centers in a 60-degree staggered pattern give 51.0% open area. That matches the 51% figure, though it is not necessarily the manufacturer’s pattern. See our guide to open area in perforated tubes and perforated filter tubes for filter cartridges.

Which corrosion resistance tube material suits humid or chemical air?

Aluminum suits light, humid service, galvanized steel suits dry low-cost builds, 304 stainless suits general exposure, and 316 stainless suits chlorides and harsh cleaning chemicals. Greenhouse air carries moisture, fertilizer residue, and sanitizers, so exposure decides the choice.

Tube materialBest forWatch for
AluminumLight, humid, low-load filtersSoft; scratches and dents
Galvanized steelDry, low-cost buildsCut edges and punched holes can rust
304 stainlessGeneral humid or washdown airPitting near chlorides
316 stainlessChlorine cleaners, coastal or chemical airHighest material cost

For details, see our notes on corrosion-resistant perforated tube and carbon steel vs stainless steel perforated tubes.

What should you ask industrial filter manufacturers before ordering perforated tubes?

Ask industrial filter manufacturers for a written spec covering material, hole pattern, tolerances, and a sample before you place a volume order. Industrial air filter manufacturers differ in what they control in-house, so confirm each point below. Our guide to choosing a reliable industrial filter manufacturer expands on this.

1.    State the material and thickness, such as 304 stainless at 1.0 mm.

2.    Give hole diameter, pitch, pattern angle, and target open area.

3.    Define tube diameter, length, and tolerances, and say where the seam sits.

4.    Specify end cap material, flange type, and how the tube joins the cap.

5.    Request a finish or coating that fits the air and cleaning chemicals.

6.    Ask for a sample, MOQ, lead time, and export packing before volume.

Send the finished spec through our request a quote page.

Who is the Can-Filter M5 unit not for?

The M5 is not for particle removal, fine dust, or fumes that need chemically treated media. Carbon adsorbs odors and many VOCs, but it does not capture dust, and some gases such as ammonia or hydrogen sulfide need specially impregnated carbon. The listing states no hazardous-area or explosion-proof rating, so do not use it in such zones without written certification. Pair it with a pre-filter for dusty air, and use a HEPA stage when particles are the target.

Frequently asked questions

How many CFM does the Can-Filter M5 move?

One retailer lists 3,509 CFM, about 5,962 m³/h, from its 20-inch Max-Fan. Real airflow falls once the 20 filters add resistance.

Are Can-Lite 9000 filters included with the M5?

No. The retailer listing says the filters are sold separately and must be bought to run the unit. The M5 takes 20 of them.

Is a carbon filter the same as a HEPA filter?

No. Carbon adsorbs odors and gases. HEPA captures particles. Many systems use both, with a pre-filter ahead of the carbon bed to protect it from dust.

How often should carbon filters be replaced?

No single interval is correct because humidity, dust, and contaminant load change carbon life. Replace it when odor returns or airflow drops.

Can perforated tubes be made to order for carbon filters?

Yes. Industrial filter manufacturers can cut and roll perforated tubes to a given diameter, hole pattern, and material.

Share it :

Leave a Reply

Your email address will not be published. Required fields are marked *